NSN 5905-01-287-2252 · NIIN 012872252 · FSC 5905
NO DASHES 5905012872252
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Application: NAV-8A/B/CDCN
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 0.487 AND INCHES MAXIMUM 0.503 |
| ABNC | FLAT HEIGHT | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.220 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.458 AND INCHES MAXIMUM 1.478 |
| AEDX | SHAFT STYLE | |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 265.0 AND MAXIMUM 275.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 15.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.375 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 2.0 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, NORMALLY OPEN |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | NAV-8A/B/CDCN |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ARNH | OPERATING POSITION | SWITCH START OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF AND SHAFT SEAL AND SWITCH |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.895 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 295.0 AND MAXIMUM 305.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 135.0 |
| CQPH | DEVICE DESIGN TYPE | AT 3:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | DC 8.000 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 76301-5-1680 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 7 |