NSN 5999-01-115-7556 · NIIN 011157556 · FSC 5999
NO DASHES 5999011157556
In Stock
DELAY LINE
Miscellaneous Electrical and Electronic Components
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARA | TERMINAL QUANTITY | 4 |
| ABGD | SLOT LENGTH | INCHES NOMINAL 0.020 |
| ACZT | ADJUSTMENT DEVICE QUANTITY | 1 |
| ACZU | ADJUSTMENT DEVICE DRIVE TYPE | SLOTTED SCREW |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.374 AND INCHES MAXIMUM 1.434 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | INCHES NOMINAL 0.300 |
| AFDV | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | INCHES NOMINAL 1.000 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AMSE | VOLTAGE RATING | VOLTS NOMINAL 50.000 |
| ANSL | INPUT IMPEDANCE RATING | OHMS 100.000 |
| ARBR | BODY DEPTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.327 |
| AZGM | MOUNTING FACILITY | TERMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | |
| BHTH | ATTENUATION IN DECIBELS | 1.500 |
| BZWM | SIGNAL DELAY METHOD | LUMPED CONSTANT |
| CCDN | DELAY TIME VARIATION METHOD | VARIABLE |
| CCDQ | SECTION DELAY TIME | NANOSECONDS MINIMUM SINGLE SECTION 0.000 AND NANOSECONDS MAXIMUM SINGLE SECTION 160.000 |
| CCDR | SEGMENT QUANTITY PER SECTION | SINGLE SECTION 1 |
| CCDT | DELAY TIME VARIATION PER DEG CELSIUS | NANOSECONDS 0.010 |
| CCDX | PULSE RISE TIME RATING | NANOSECONDS 32.0 |
| CDQK | SLOTTED HOLE WIDTH | INCHES NOMINAL 0.010 |
| CSCF | TERMINAL TYPE | PIN |
| SPCL | SPECIAL TEST FEATURES | SELECTED AND TESTED FOR AN/TPX-42A(V)10 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 00752-505174 |