NSN 3110-00-725-2511 · NIIN 007252511 · FSC 3110
NO DASHES 3110007252511
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYK | SHIELD QUANTITY | 2 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.1875 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.5000 |
| MATT | MATERIAL | INNER RING STEEL |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.1562 |
| STYL | STYLE DESIGNATOR | |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0000 AND INCHES MAXIMUM RADIAL 0.0003 |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 16.5 |
| FEAT | SPECIAL FEATURES | INTERNAL CLEARANCE MEASURED UNDER A 1/2 LB REVERSING LOAD; SPRING SEPERATORS,SHIELDS AND WIRES OF 302 STAINLESS STEEL; OTHER SPECIAL FEATURES |
| LBMA | LUBRICATION MATERIAL | OIL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-6085 |
| MATT | MATERIAL | BALL STEEL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | COILED |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER STEEL CORROSION RESISTING |
| MATT | MATERIAL | SHIELD STEEL CORROSION RESISTING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| AGZK | INTERNAL FIT-UP CONTACT ANGULAR DIRECTION | INWARD CONVERGENT |
Supersedes
This item replaces cancelled NIINs 000066621 · 009021041. An older drawing citing one of those numbers resolves here.