NSN 4720-00-974-1935 · NIIN 009741935 · FSC 4720
NO DASHES 4720009741935
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| CQRB | SEAT ANGLE | SECOND END DEGREES 45.0 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AHNC | CONNECTION STYLE | |
| AAJD | THREAD CLASS | 2B |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.812 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 16.500 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED EXTERNAL TUBE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.000 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.625 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 1A |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CBBL | FEATURES PROVIDED | NONSKIVE AND REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 9000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.562 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4500.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNF |