NSN 4720-00-898-4533 · NIIN 008984533 · FSC 4720
NO DASHES 4720008984533
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING ALUMINUM ALLOY |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.500 |
| ADJS | EXTERIOR COLOR | NATURAL |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.547 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.344 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.562 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING ANODIZE |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 17.625 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.562 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S87028 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRSM | VACUUM IN TORR | 76.2 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |