NSN 5905-00-835-5349 · NIIN 008355349 · FSC 5905
NO DASHES 5905008355349
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.50 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.750 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18876-9175703 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| ABTD | MOUNTING SLOT WIDTH | INCHES MINIMUM 0.119 AND INCHES MAXIMUM 0.129 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | FLANGE AND SLOT |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.297 AND INCHES MAXIMUM 1.328 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 20.0 |
| FEAT | SPECIAL FEATURES | 1 WATT AT 80 DEG C |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.490 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.810 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 150.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -15.0 TO 15.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.187 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 240.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.290 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 1.526 AND INCHES MAXIMUM 1.536 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -40.0 TO 30.0 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
Supersedes
This item replaces cancelled NIIN 007671665. An older drawing citing one of those numbers resolves here.