NSN 3110-01-200-8537 · NIIN 012008537 · FSC 3110
NO DASHES 3110012008537
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Application: F-16 C/D ACFT
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.6249 AND INCHES MAXIMUM 0.6299 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.1809 AND INCHES MAXIMUM 1.1811 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 2.7400 AND INCHES MAXIMUM 2.7600 |
| AGAV | END ITEM IDENTIFICATION | F-16 C/D ACFT |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0700 AND INCHES MAXIMUM 0.0800 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES MINIMUM 2.4406 AND INCHES MAXIMUM 2.4409 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| FEAT | SPECIAL FEATURES | FLANGE IS EXTENDED IN TWO PLACES 1.5400 FROM CENTER LINE AND 1.5340 FROM CENTERLINE TO PROVIDE MOUNTING TABS;EACH TAB IS 0.4800 IN. MIN 0.5200 IN. MAX WIDE W/TAPPED HOLE 0.2160 IN. MIN 0.2240 IN. MAX CENTERED IN EACH TAB;EXTENSION IS 0.8100 IN. NOM LONG |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | CAGE STEEL COMP 4340 |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD 2ND MATERIAL RESPONSE A-S-6491 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD 1ST MATERIAL RESPONSE A-S6491 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD 3RD MATERIAL RESPONSE A-S-6491 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 012982474. An older drawing citing one of those numbers resolves here.