NSN 5962-01-033-5515 · NIIN 010335515 · FSC 5962
NO DASHES 5962010335515
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Application: AN/ASN-124 FSCM 35351
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.280 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.200 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.070 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 88.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| AGAV | END ITEM IDENTIFICATION | AN/ASN-124 FSCM 35351 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND ASYNCHRONOUS AND W/CLEAR AND W/DISABLE AND POSITIVE OUTPUTS AND LOW POWER AND W/ENABLE |
| CQSJ | INCLOSURE MATERIAL | GLASS AND METAL |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 4 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | SHIFT REGISTER, SERIAL IN, PARALLEL OUT 1 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | MIL-M-38510 F-3 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 5.5 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INALS AND GOLD BODY |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-STD-883 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 14 |
Supersedes
This item replaces cancelled NIINs 010274251 · 012716082. An older drawing citing one of those numbers resolves here.