NSN 5990-00-458-9643 · NIIN 004589643 · FSC 5990
NO DASHES 5990004589643
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSL | BODY SIZE | 32 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.400 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7300 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0300 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 5.5 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.1000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.0980 AND INCHES MAXIMUM 3.1000 |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNIFIED NATIONAL COARSE (UNC) |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 420.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.7000 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.6150 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 2.6950 AND INCHES MAXIMUM 2.7000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.2900 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 2.7500 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 2.7500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 4.3700 |