NSN 5905-00-462-4038 · NIIN 004624038 · FSC 5905
NO DASHES 5905004624038
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 9 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.968 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.062 |
| AEDX | SHAFT STYLE | |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 324.0 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.563 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.0620 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.25 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9683 AND INCHES MAXIMUM 0.9688 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.20 TO 0.20 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES AND SILVER TER-INAL SURFACES |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |