NSN 6105-01-252-1162 · NIIN 012521162 · FSC 6105
NO DASHES 6105012521162
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 10.750 |
| AAJU | OVERALL LENGTH | INCHES 21.190 |
| AAJV | OVERALL WIDTH | INCHES 10.750 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 1.250 |
| AAUB | HOLE DIAMETER | SINGLE END INCHES NOMINAL 0.203 |
| AAZQ | HOLE DEPTH | SINGLE END INCHES NOMINAL 1.000 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.250 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.125 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.000 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.250 |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 8 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CNMM | FRAME SIZE DESIGNATION | 215TNY |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 7.500 OR HORSEPOWER 0.950 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 1.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 5.690 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 7.250 |
| CWFX | ROTOR SPEED RATING IN RPM | FIRST MULTIPLE NO LOAD 3600.0 OR SECOND MULTIPLE NO LOAD 1800.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT FIRST MULTIPLE 9.200 OR SECOND MULTIPLE 2.200 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A13 AND THIRD STYLE A9 AND FOURTH STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT STYLE A1 DIA IS 1.375 IN. |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 AND SOLDER LUG 6 |