NSN 5307-01-100-3766 · NIIN 011003766 · FSC 5307
NO DASHES 5307011003766
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 1.054 AND INCHES MAXIMUM 1.074 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 1.016 AND INCHES MAXIMUM 1.026 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.840 AND INCHES MAXIMUM 0.860 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.110 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 5.347 AND INCHES MAXIMUM 5.367 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 1.097 AND INCHES MAXIMUM 1.117 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 49.0 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.500 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.500 |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 2.150 AND INCHES MAXIMUM 2.170 |
| CSXH | STUD END SHANK DIAMETER | INCHES NOMINAL 0.499 |
| CTDT | NUT END SHANK DIAMETER | INCHES NOMINAL 0.499 |
| FEAT | SPECIAL FEATURES | 37,800 LBS TENSILE STRENGTH |
| MATT | MATERIAL | STEEL COMP 4330 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6411 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-C-8837,TYE 2,CLASS 2 OR MIL STD 2ND TREATMENT RESPONSE 1500,TYE 2,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |