NSN 9330-01-502-3960 · NIIN 015023960 · FSC 9330
NO DASHES 9330015023960
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 16.250 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 23.260 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH ANGLED CUTOFF ALONG TOP/LONG EDGE; FROM NEAR SURFACE AT TOP EDGE TO 5.50 FROM TOP ON FAR SURFACE; WITH CUTOUTS ON EACH TOP CORNER: WITH INNER BOTTOM CORNER A 90 DEGREE ARC WITH RADIUS 1.25 CENTERED 1.54 FROM OUTER EDGE & 4.81 FROM TOP WITH CUTOUT EXTENDING HORIZONTALLY & VERTICALLY TO OUTER EDGES; AN ARCHED CUTOUT,OPENING ON TOP EDGE 12.31 & 17.31 INCHES FROM LEFT EDGE, SLANTING DOWN & TO RIGHT WITH WIDTH OF 5.00, ENDING IN CIRCLE WITH 2.50 RADIUS, CENTERED 16.95 FROM LEFT & 3.62 FROM BOTTOM; A LINE CUT THRU, 1.56 FROM LEFT CUT EDGE AT TOP EDGE, VERTICALLY DOWN 5.5 INCHES ON NEAR SURFACE & SLANTING DOWN TO 6.75 INCHES FROM BOTTOM ON FAR SURFACE; NEAR SIDE IS MARKED "FWD" & "UP" ON 2 LINES AT LEFT TOP & WITH PART NUMBER IN LOWER LEFT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |