NSN 9330-01-502-3007 · NIIN 015023007 · FSC 9330
NO DASHES 9330015023007
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 25.440 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 29.580 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | IRREGULARLY SHAPED: CUTOUT ON RIGHT/LONG EDGE: 9.78WX10.0H AT BOTTOM CORNER; CUTOUT FROM THIS CUTOUT CORNER: 1.50WX3.25H, 2.93 INCHES FROM BOTTOM; CIRCULAR CUTOUT NEAR LEFT EDGE: 15.66WX3.82H, 6.18 FROM BOTTOM; UPPER EDGE IS VERY IRREGULAR - SEE DRAWING FOR DETAILS; NEAR SIDE IS MARKED: "UP" & "AFT" ON 2 LINES NEAR CENTER TOP & PART NUMBER BELOW & TO THE RIGHT |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |