NSN 9330-01-502-3351 · NIIN 015023351 · FSC 9330
NO DASHES 9330015023351
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 11.890 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 38.620 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH LONG SIDES HORIZONTAL, HAS A KEY-SHAPED CUTOUT IN CENTER: OVAL AT LEFT END HAS RADIUS OF 3.50 AT EACH END, LEFT ARC CENTERED 15.13 FROM LEFT & 6.34 FROM TOP, RIGHT ARC CENTERED 23.57 FROM LEFT, 6.34 FROMTOP, OVAL IS CUT THRU AT ANGLE SO HORIZONTAL CENTER ON FAR SIDE IS 5.36 FROM TOP; CUTOUT ON RIGHT EDGE OF OVAL: 3.56WX1.75H, 4.02 FROM TOP & CUTOUT ON BOTTOM EDGE OF THIS ONE: 3.00WX3.15H, 32.06 FROM LEFT & 5.77 FROM TOP WITH LINE CUT THRU FROM BOTTOM OF THIS CUTOUT TO BOTTOM OF ITEM, 30.56 FROM LEFT EDGE; NEAR SIDE IS MARKED: "FWD" & "UP" ON 2 LINES IN UPPER RIGHT CORNER & WITH PART NUMBER IN LOWER LEFT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |