NSN 9330-01-502-3768 · NIIN 015023768 · FSC 9330
NO DASHES 9330015023768
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.710 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 38.140 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGLE WITH CUTOUT FROM BOTTOM/LONG & LOWER RIGHT EDGES: RECTANGULAR CUTOUT , 30.44WX5.00H FROM RIGHT CORNER; SEMICIRCLE WITH 9.00 RADIUS, CENTERED 18.44 FROM RIGHT ON CUT EDGE; A SEMICIRCLE WITH 2.50 RADIUS, CENTERED 20.94 FROM RIGHT ON SAME CUT EDGE, OVERLAPPING FIST CIRCLE; BOTTOM LEFT EDGE IS CUT AT ANGLE TOWARD CUTOUTS (APPROXIMATELY 22 DEGREE ANGLE), THERE IS A GROOVE: 1.50WX1.75D ALONG THIS BOTTOM EDGE; NEAR SIDE IS MARKED: "FWD" & "UP" ON 2 LINES, CROSSWISE, NEAR CENTER OF LEFT EDGE & WITH PART NUMBER, LENGTHWISE, NEAR UPPER LEFT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |