NSN 9330-01-502-2983 · NIIN 015022983 · FSC 9330
NO DASHES 9330015022983
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 19.400 |
| ABNM | THICKNESS | INCHES NOMINAL 6.720 |
| ABRY | LENGTH | INCHES NOMINAL 25.710 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | ROUGHLY RECTANGULAR; NEAR SIDE: LEFT, SHORT EDGE TAPERS 1.00 INCH TO BOTTOM, BOTTOM EDGE TAPERS 1.65 TO RIGHT EDGE, RIGHT EDGE TAPERS 1.00 TO TOP EDGE; TOP SURFACE CURVES FROM 6.72 INCHES THICK AT BOTTOM EDGE TO 2.50 INCHES AT TOP EDGE WITH RADIUS OF CURVE BEING 40.25; FAR SIDE HAS MARKINGS: "FWD" NEAR TOP RIGHT CORNER (FAR SIDE UP) & "UP" & "INBD" ON 2 LINES TO RIGHT & PART NUMBER NEAR BOTTOM LEFT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |