NSN 9330-01-502-3070 · NIIN 015023070 · FSC 9330
NO DASHES 9330015023070
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 16.730 |
| ABNM | THICKNESS | INCHES NOMINAL 6.720 |
| ABRY | LENGTH | INCHES NOMINAL 21.620 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | ROUGHLY RECTANGULAR: LEFT/SHORT EDGE TAPERS 1.00 AT BOTTOM EDGE & HAS 2 CUTOUTS: 2.00WX0.50H, 4.08 & 11.84 FROM BOTTOM; BOTTOM EDGE HAS CUTOUT: 15.92WX0.58H, 5.72 FROM LEFT; FAR SIDE: SURFACE IS CURVED WITH RADIUS OF 40.28 FROM THICKNESS OF 6.72 ALONG BOTTOM EDGE TO 2.50 THICK ALONG TOP; NEAR SIDE: HAS CUTS 1.91 INCHES DEEP, 3.00 FROM BOTTOM AT LEFT EDGE HORIZONTALLY 9.25 INCHES THEN DOWN TO BOTTOM EDGE AND 1.91D, 11.25 FROM LEFT, AT BOTTOM EDGE, UP TO 5.75 FROM BOTTOM CUTOUT, THEN OVER TO RIGHT EDGE, & 1.91D , 2.00 ABOVE LAST LINE LENGTHWISE TO OPPOSIT EDGE; NEAR SIDE IS MARKED "FWD" NEAR TOP LEFT CORNER, "UP" & "INBD" NEAR TOP RIGHT CORNER & PART NUMBER NEAR BOTTOM RIGHT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |