NSN 9330-01-502-3644 · NIIN 015023644 · FSC 9330
NO DASHES 9330015023644
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 16.210 |
| ABNM | THICKNESS | INCHES NOMINAL 7.720 |
| ABRY | LENGTH | INCHES NOMINAL 33.710 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | ROUGHLY TRAPEZOIDAL IN SHAPE WITH TOP SURFACE CURVED WIH RADIUS OF 40.25 FROM TOP/LONG EDGE TO BOTTOM ONE; 2 CUTOUTS ON LEFT EDGE: 1.75WX0.75H, 2.56 & 8.90 INCHES FROM TOP EDGE; LEFT EDGE HAS HOLE WITH DIAM OF 2.00, CENTERED 6.14 FROM BOTTOM, AT FAR SURFACE, EXTENDING RIGHT FOR 5.22 INCHES, THEN ANGLING DOWN AT 45 DEGREES TO BOTTOM EDGE; RIGHT EDGE HAS 1.75 DIAM HOLE, CENTERED 4.56 FROM BOTTOM, GOING LEFT FOR 7.50 INCHES THEN ANGLING UP AT 45 DEGREES TO TOP EDGE; FAR SIDE IS MARKED "UP" & "INBD" ON 2 LINES IN UPPER LEFT CORNER *FAR SIDE UP) & "FWD" IN UPPER RIGHT CORNER & WITH PART NUMBER IN LOWER RIGHT |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |