NSN 9330-01-502-3028 · NIIN 015023028 · FSC 9330
NO DASHES 9330015023028
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 16.090 |
| ABNM | THICKNESS | INCHES NOMINAL 6.790 |
| ABRY | LENGTH | INCHES NOMINAL 24.370 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | IRREGULARLY SHAPED: SEE DRAWING FOR DETAILS; FAR SIDE HAS 30 DEGREE CUTOUT ALONG RIGHT/LONG EDGE (FAR SIDE UP) AND ROUGHLY TRIANGULAR CUTOUT ON LEFT EDGE,15 -30 DEGREES FROM TOP SURFACE TO BOTTOM SURFACE & IS MARKED ""FWD" LENGTHWISE ALONG LOWER RIGHT EDGE & "UP" & P/N LENGTHWISE ALONG UPPER LEFT EDGE; NEAR SIDE HAS LENGTHWISE CUTOUT STARTING AT BOTTOM 30 DEGREE CUT, SLANTING UP TO POINT 2.00 FROM BOTTOM & 15.84 FROM RIGHT, THEN TO POINT 3.45 UP & 11.65 FROM RIGHT, TO 0.50 FROM TOP & 9.71 FROM RT, TO TOP, 4.85 FROM RT, THEN TO 0.50 FROM TOP AT RIGHT EDGE; TOP SURFACE HAS GRADUATED LENGTHWISE ANGLES - SEE DRAWING; BOTTOM EDGE HAS 30 DEGREE CROSSWISE CUTOUT (O AT FAR SURFACE TO 30 AT TOP); THERE IS A V-SHAPED CUTOUT: 30 DEGREES TOWARD BOTTOM EDGE, 9.37 FROM BOTTOM & 30 DEGREES TOWARD TOP EDGE, 11.73 FROM BOTTOM |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |