NSN 9330-01-502-3042 · NIIN 015023042 · FSC 9330
NO DASHES 9330015023042
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 16.760 |
| ABNM | THICKNESS | INCHES NOMINAL 6.790 |
| ABRY | LENGTH | INCHES NOMINAL 24.620 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | IRREGULARLY SHAPED - SEE DRAWING FOR DETAILS; FAR SIDE HAS 30 DEGREE CUTOUT ALONG LEFT/LONG EDGE (FAR SIDE UP) & ROUGHLY TRIANGULAR CUTOUT ALONG RIGHT EDGE, 30 TO 15 DEGREES TOP TO BOTTOM (FAR SIDE UP) AND IS MARKED ALONG LEFT EDGE: "FWD" NEAR BOOT CORNER, "UP" IN CENTER & PART NUMBER NEAR TOP; NEAR SIDE SLANTS CROSSWISE FROM BOTTOM 30 DEGREE CUT TO 0.50 FROM TOP, 9.71 FROM LEFT EDGE, ON TO MEET TOP, 4.85 FROM LEFT & BACK TO 0.50 FROM TOP AT LEFT EDGE; UPPER SURFACE HAS GRADUATED LENGTHWISE ANGLES; BOTTOM EDGE HAS CROSSWISE CUT OF 30 DEGREES, BOTTOM SURFACE TO TOP SURFACE; THERE IS A V-SHAPED CUTOUT, WITH 1 SIDE STARTING 9.37 INCHES FROM BOTTOM EDGE & 2.00 INCHES DEEP, AT 30 DEGREE ANGLE TOWARD TOP SURFACE & TOWARD BOTTOM EDGE & OPPOSITE CUT FROM 11.75 FROM BOTTOM EDGE, 2.00 DEEP, 30 DEGREES TOWARD TOP SURFACE & TOWARD TOP EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |