NSN 9330-01-502-3508 · NIIN 015023508 · FSC 9330
NO DASHES 9330015023508
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 15.850 |
| ABNM | THICKNESS | INCHES NOMINAL 6.790 |
| ABRY | LENGTH | INCHES NOMINAL 24.370 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | IRREGULARLY SHAPED - SEE DRAWING FOR DETAILS; LEFT LONG EDGE TAPERS TO 15.85 WIDE AT TOP EDGE & HAS CUTOUT BEGINNING ON FAR SURFACE, 1.75 FROM LEFT EDGE, UP AT 30 DEGREE ANGLE TO EDGE THEN UP & RIGHT TO 14.91 FROM RIGHT EDGE & 2.00 FROM FARSIDE, UP & RT TO 10.71 FROM RT & 3.45 FROM FAR SIDE, TO 8.71 FROM RT & 0.50 FROM TOP, TO 4.48 FROM RT AT TOP, TO 0.50 FROM TOP AT RT EDGE; TOP SURFACE HAS GRADUATED LENGTHWISE ANGLES; RT EDGE HAS ROUGHLY TRIANGULAR CUTOUT FROM NEAR SURFACE TO FAR ONE, WITH 15 TO 30 DEGREE CUTS, ENDING 4.48 FROM RIGHT EDGE AT FAR SURFACE; FAR SIDE IS MARKED: "UP FWD" NEAR LEFT LONG EDGE, RIGHT CORNER & WITH PART NUMBER NEAR THE CENTER OF THAT EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |