NSN 9330-01-502-3455 · NIIN 015023455 · FSC 9330
NO DASHES 9330015023455
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 15.400 |
| ABNM | THICKNESS | INCHES NOMINAL 7.150 |
| ABRY | LENGTH | INCHES NOMINAL 18.940 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | IRREGULARLY SHAPED - SEE DRAWING FOR DETAILS; SOMEWHAT MUSHROOM-SHAPED VIEWED FROM LONG EDGE & RECTANGULAR FROM TOP WITH ARCHED CUTOUT ALONG RIGHT/LONG EDGE: RADIUS OF 3.125, 9.31 FROM TOP EDGE; LEFT EDGE HAS CUTOUT 3.18 FROM FAR SURFACE, 1.62W THEN SLANTING UP & TO THE RIGHT AT 30 DEGREE ANGLE TO NEAR SURFACE; TOP SURFACE IS ROUNDED CROSSWISE WITH RADIUS OF 26.62, ENDING 1.16 FROM TOP & BOTTOM EDGES WHICH ARE CUT OFF AT A SLANT TO DEPTH OF 3.18 FROM FAR SIDE THEN CUT BACK IN HORIZONTALLY TO WIDTH OF 14.40, THEN DOWN IN 45 DEGREE ANGLE TO OUTER EDGE; FAR SIDE IS MARKED ALONG LONG EDGE WITHOUT ARCH: "FWD" TO LEFT OF CENTER & PART NUMBER IN RIGHT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |