NSN 9330-01-502-3943 · NIIN 015023943 · FSC 9330
NO DASHES 9330015023943
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 13.340 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 22.750 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | IRREGULARLY SHAPED: SEE DRAWING FOR DETAILS; NEAR SIDE HAS 45 DEGREE CUT FROM FAR SURFACE OF TOP EDGE TO 2.66 FROM TOP EDGE ON NEAR SURFACE & MARKINGS: "FWD" & "UP" ON 2 LINES IN UPPER LEFT CUTOUT & PART NUMBER IN UPPER RIGHT ONE; TOP EDGE HAS 2 RECTANGULAR CUTOUTS: 2.00WX3.34H, 4.02 & 17.02 FROM RIGHT EDGE; BOTTOM EDGE HAS ARCHED CUTOUT WITH RADIUS OF 2.00 CENTERED 6.46 FROM RIGHT EDGE & 1.92 FROM BOTTOM, A LENGTHWISE CUOUT 7.83WS1.92H, 14.92 FROM RIGHT EDGE; BOTTOM LEFT & BOTTOM RIGHT CORNERS ARE CUT OFF IRREGULARLY; ALSO A ROUGHLY T-SHAPED GROOVE 2.75 DEEP WITH LEG 14.92 FROM RIGHT ON BOTTOM EDGE OF BOTTOM CUTOUT & CROSSBAR SLANTING 45 DEGREES FROM LEFT CORNER ACROSS LEG TO POINT 6.46 FROM RIGHT & 5.50 UP, THEN DOWN AT 45 DEGREES TO RIGHT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |