NSN 9330-01-502-5635 · NIIN 015025635 · FSC 9330
NO DASHES 9330015025635
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 15.400 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON LEFT/SHORT EDGE: 1.25WX1.34H, 2.16 INCHES FROM BOTTOM & 1.25WX1.16H, 2.20 FROM TOP; A CUTOUT ON BOTTOM EDGE: 7.56WX0.32H, 6.80 INCHES FROM LEFT EDGE; A CIRCULAR PUNCHOUT WITH 5.00 DIAMETER, CENTERED 9.04 FROM LEFT & 6.70 FROM BOTTOM WITH LINE CUT THRU FROM CENTER OF CIRCLE TO LEFT EDGE; NEAR SIDE HAS LENGTHWISE GROOVE: 2.20WX1.36D ALONG TOP EDGE & IS MARKED: "UP" & "FWD" ON 2 LINES IN UPPER RIGHT AREA BELOW GROOVE & WITH PART NUMBER IN LOWER RIGHT CORNER; FAR SIDE HAS LENGTHWISE GROOVE: 2.16WX1.60D ALONG BOTTOM EDGE & SEMICIRCULAR LENGTHWISE GROOVE WITH 2.00 RADIUS CENTERED 7.00 FROM BOTTOM & EXTENDING FROM LEFT EDGE TO RIGHT, 9.04 INCHES |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |