NSN 9330-01-502-5638 · NIIN 015025638 · FSC 9330
NO DASHES 9330015025638
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 18.300 |
| ABNM | THICKNESS | INCHES NOMINAL 2.500 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH CUTOUT ON TOP/LONG EDGE: 7.80WX2.50H, 9.20 INCHES FROM LEFT EDGE; 2 CUTOUTS ON LEFT EDGE: 1.35WX1.00H, 2.50 FROM TOP & 2.04WX3.60H AT BOTTOM CORNER; CUTOUT ON BOTTOM EDGE: 19.30WX0.80H 1.10 FROM LEFT EDGE; A CIRCULAR PUNCHOUT WITH 4.88 INCH DIAMETER CENTERED 9.98 FROM LEFT & 7.04 FROM BOTTOM; NEAR SIDE HAS "UP"& "FWD" IN UPPER RIGHT CORNER & PART NUMBER IN LOWER RIGHT CORNER; FAR SIDE TAPERS 0.36 AT BOTTOM EDGE (CUTOUT ON BOTTOM EDGE FOLLOWS THIS ANGLE) |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |