NSN 9330-01-502-4924 · NIIN 015024924 · FSC 9330
NO DASHES 9330015024924
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.300 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON LEFT/SHORT EDGE: 1.25WX1.20H, 2.20 FROM TOP & 2.64WX4.20H AT BOTTOM LEFT CORNER; BOTTOM TAPERS 0.50 TOWARD FAR SIDE & HAS CUTOUT 0.80W, 1.68 FROM RIGHT EDGE, EXTENDING TO LEFT EDGE & FOLLOWING ANGLE OF TAPER; TOP EDGE HAS 2 CUTOUTS: 2.03WX1.25H, 8.53 FROM RIGHT & ARCH 6.74WX12.30H, 8.13 FROM LEFT ENDING IN CIRCLE WITH 3.37 RADIUS; FAR SIDE HAS LENGTHWISE GROOVE 2.20WX1.68H ALONG TOP EDGE & IS MARKED "UP" & "AFT" ON 2 LINES IN UPPER LEFT AREA (FAR SIDE UP) AND WITH PART NUMBER IN UPPER RIGHT AREA |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |