NSN 9330-01-502-5155 · NIIN 015025155 · FSC 9330
NO DASHES 9330015025155
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 18.160 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 20.940 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON RIGHT/SHORT EDGE: 1.40WX2.40H AT TOP CORNER & 1.40WX2.24H AT BOTTOM CORNER; 2 CUTOUTS ON LEFT EDGE: 1.26WX1.60H, 2.24 FROM BOTTOM & 3.00WX3.70H AT TOP CORNER; TOP EDGE HAS CUTOUT 2.62WX3.70H, 4.10 FROM RIGHT; NEAR SIDE HAS LENGTHWISE GROOVES: 3.70WX2.20D ALONG TOP EDGE & 2.12WX0.68D ALONG BOTTOM EDGE & CROSSWISE GROOVE: 1.40WX2.68D ALONG RIGHT EDGE; FAR SIDE HAS LENGTHWISE GROOVES: (FAR SIDE UP) 2.40WX0.68D ALONG TOP EDGE & 2.24WX1.00D ALONG BOTTOM EDGE & CUTOUT: 4.14WX6.32LX2.00D AT RIGHT BOTTOM CORNER & IS MARKED "UP" & "AFT" IN UPPER GROOVE & WITH PART NUMBER ABOVE LOWER GROOVE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |