NSN 9330-01-502-1583 · NIIN 015021583 · FSC 9330
NO DASHES 9330015021583
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 16.660 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 22.320 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON RIGHT/SHORT EDGE: 1.26WX2.70H AT BOTOM CORNER AND 1.26WX3.66H AT TOP CORNER; 3 CUTOUTS ON LEFT EDGE: 1.00WX1.00H, 1.40 & 7.80 FROM BOTTOM AND 1.00WX1.40H, 13.40 FROM BOTTOM; AND A RECTANGULAR CUTOUT FROM TOP EDGE: 6.50WX6.06H, 8.75 FROM LEFT EDGE; NEAR SIDE HAS LENGTHWISE GROOVES: 2.70WX2.25D ALONG BOTTOM EDGE AND 2.36WX1.70D ALONG TOP EDGE; A CROSSWISE GROOVE: 1.26W ALONG RIGHT EDGE AND HAS MARKINGS: "UP" AND "AFT" ON 2 LINES NEAR TOP LEFT CORNER AND PART NUMBER UNDER CUTOUT |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |