NSN 9330-01-502-1530 · NIIN 015021530 · FSC 9330
NO DASHES 9330015021530
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.760 |
| ABNM | THICKNESS | INCHES NOMINAL 2.500 |
| ABRY | LENGTH | INCHES NOMINAL 21.070 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH CUTOUT ON RIGHT/SHORT LOWER CORNER: 5.00WX4.00H AND CUTOUT ON TOP EDGE, 3.20WX10.06L, 10.68 INCHES FROM LEFT EDGE; NEAR SIDE IS TAPERED 0.30 AT TOP EDGE; FAR SIDE HAS CROSSWISE GROOVE 2.50WX0.60D ALONG TOP EDGE AND ROUGHLY RECTANGULAR-SHAPED SURFACE CUTOUT: 17.07WX11.00HX1.25D FROM BOTTOM LEFT CORNER AND ADDITIONAL CUTOUT ALONG RIGHT EDGE, 4.00WX3.20HX1.25D, 7.20 INCHES FROM BOTTOM EDGE AND HAS MARKINGS "UP" AND "AFT" ON 2 LINES BELOW TOP GROOVE ON LEFT SIDE AND PART NUMBER ON RIGHT SIDE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |