NSN 9330-01-502-1398 · NIIN 015021398 · FSC 9330
NO DASHES 9330015021398
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.500 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 22.320 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON RIGHT/SHORT EDGE: 1.26WX1.30H, 2.20 INCHES FROM BOTTOM AND 1.26WX1.00H, 14.40 FROM BOTTOM; 3 CUTOUTS ON LEFT EDGE: 1.00WX1.00H, 2.00 & 8.60 & 15.5 INCHES FROM BOTTOM; A RECTANGULAR CUTOUT NEAR CENTER: 4.28WX3.50H, 7.65 FROM BOTTOM AND 8.50 FROM RIGHT WITH LINE CUT THRU FROM TOP OF CUTOUT TO TOP EDGE OF ITEM, 10.70 FROM RIGHT EDGE; NEAR SIDE IS TAPERED 0.50 AT BOTTOM EDGE AND HAS CUTOUT 9.10WX1.36HX0.88D, 6.40 FROM LEFT AND HAS MARKINGS: "UP" AND "AFT" NEAR TOP LEFT CORNER AND PART NUMBER CENTERED ABOVE LOWER CUTOUT |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |