NSN 9330-01-502-0633 · NIIN 015020633 · FSC 9330
NO DASHES 9330015020633
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 16.660 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 22.320 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 3 CUTOUTS ON RIGHT/SHORT EDGE: 1.25WX1.40H, 1.40 AND 7.80 INCHES FROM BOTTOM AND 1.00WX1.40H, 18.40 FROM BOTTOM, 2 CUTOUTS ON LEFT EDGE, 1.26WX2.70H FROM BOTTOM CORNER AND 1.26WX3.66H FROM TOP CORNER, A CUTOUTON TOP EDGE,6.50WX6.06H, 8.75 FROM RIGHT EDGE; NEAR SIDE HAS TAPER OF 0.76 ALONG TOP EDGE; FAR SIDE HAS GROOVES, 2.50WX2.25D ALONG BOTTOM EDGE, 2.356WX1.70D ALONG TOP EDGE AND HAS MARKINGS "UP" AND "AFT" ON 2 LINES NEAR UPPER LEFT CORNER (FAR SIDE UP) AND PART NUMBER BELOW TOP EDGE CUTOUT |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |