NSN 9330-01-502-0644 · NIIN 015020644 · FSC 9330
NO DASHES 9330015020644
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 18.180 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 22.320 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON RIGHT/SHORT EDGE: 1.00WX1.00H, 2.26 AND 15.20 INCHES FROM BOTTOM, A CUTOUT 9.00WX7.00H FROM BOTTOM LEFT CORNER AND AN ARCHED CUTOUT FROM BOTTOM EDGE, 8.00WX11.00H, 3.00 INCHES FROM RIGHT EDGE, A CROSSWISE HALF-ARCH CUTOUT FROM LEFT EDGE, ROUNDED SIDE DOWN, 3.90HX9.00W, 8.50 FROM BOTTOM, AND A CUTOUT ON LEFT EDGE, 1.000WX1.00H, 2.58 FROM TOP; FAR SIDE HAS A GROOVE, 2.58WX0.84D ALONG TOP EDGE AND HAS MARKINGS: "UP" IN TOP GROOVE AND "AFT" BELOW IT AND PART NUMBER TO THE RIGHT OF "AFT" |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |