NSN 9330-01-501-6435 · NIIN 015016435 · FSC 9330
NO DASHES 9330015016435
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 18.200 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH CUTOUTS ON RIGHT/SHORT EDGE: 1.25WX1.54H, 2.00 UP FROM BOTTOM EDGE AND 1.25WX1.52H, 15.60 UP FROM BOTTOM EDGE; ON FAR SIDE: A LENGTHWISE GROOVE 1.00DX2.00W ALONG TOP EDGE AND A GROOVE 1.00DX2.32H ALONG BOTTOM EDGE, WORDS "UP" AND "AFT" ON W LINES NEAR NOTCHED EDGE BELOW TOP GROOVE AND PART NUMBER IN LOWER GROOVE NEAR NOTCHED EDGE; ON NEAR SIDE: A GROOVE 0.60DX2.00W ALONG BOTTOM EDGE AND |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |