NSN 9330-01-501-6473 · NIIN 015016473 · FSC 9330
NO DASHES 9330015016473
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.400 |
| ABNM | THICKNESS | INCHES NOMINAL 2.500 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH CUTOUT 2.50WX4.12H AT BOTTOM RIGHT CORNER (WITH LONG SIDES RUNNING HORIZONTALLY) AND A CUTOUT 17.7WX0.80H, 3.2 INCHES FROM LEFT EDGE; A HOLE 3.50 INCHES IN DIAMETER, CUT THRU, CENTERED 10.08 UP FROM BOTTOM EDGE AND 10.30 OVER FROM LEFT EDGE; A GROOVE 2.20WX1.42H ALONG TOP EDGE; ON FAR SIDE MARKINGS "UP" AND "AFT" ON 2 LINES NEAR TOP EDGE AND NEAR NOTCHED EDGE AND PART NUMBER MARKED RIGHT ABOVE CUTOUT ON BOTTOM EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |