NSN 9540-01-497-6420 · NIIN 014976420 · FSC 9540
NO DASHES 9540014976420
In Stock
CHANNEL,STRUCTURAL
Structural Shapes, Nonferrous Base Metal
Application: INTERIM ARMORED VEHICLE(IAV), CONTRACTOR LOGISTIC SUPPORT(CLS)
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.500 |
| ABRY | LENGTH | INCHES NOMINAL 12.740 |
| ADXJ | LEFT SIDE FLANGE HEIGHT | INCHES NOMINAL 0.330 |
| ADXK | RIGHT SIDE FLANGE HEIGHT | INCHES NOMINAL 0.330 |
| ADXL | LEFT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.130 |
| ADXM | RIGHT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.130 |
| AGAV | END ITEM IDENTIFICATION | INTERIM ARMORED VEHICLE(IAV), CONTRACTOR LOGISTIC SUPPORT(CLS) |
| AGTA | BASIC SHAPE STYLE | |
| AJGP | BASE FLANGE THICKNESS | INCHES NOMINAL 0.130 |
| CMZY | FIRST TIP STYLE | |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| CQHP | LEFT INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| CSQD | RIGHT INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | VERTICAL STIFFENER, RACK D2 |
| FEAT | SPECIAL FEATURES | HAS 1 HOLE, 0.765 THRU CENTERED 5.886 INCH FROM ONE SHORT END AND 7.50 INCH FROM A LENGTHWIES EDGE; ALSO 3 HOLES 0.219 THRU CENTERED 0.660, 3.511 AND 10.740 INCHES FROM SAME SHORT END AND 0.750 INCH FROM LENGTHWISE EDGE |
| HEAT | HEAT TREATMENT | T-52 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 6063 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- B221 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | CHROMATE AND PAINT |