NSN 5305-01-016-2924 · NIIN 010162924 · FSC 5305
NO DASHES 5305010162924
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.538 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.933 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.933 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6240 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.143 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 2.395 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 200000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.124 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 COND D |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |