NSN 1630-00-056-2329 · NIIN 000562329 · FSC 1630
NO DASHES 1630000562329
In Stock
CYLINDER ASSEMBLY,HYDRAULIC BRAK
Aircraft Wheel and Brake Systems
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHB | FIRST END OUTSIDE DIAMETER | ALL WORKING ENDS INCHES MINIMUM 0.770 AND INCHES MAXIMUM 0.830 |
| AAXX | MOUNTING TYPE | CYLINDER HEAD END TONGUE |
| ABJH | TEMP RATING | FAHRENHEIT -65.0 AND FAHRENHEIT 275.0 |
| ABKP | MOUNTING FACILITY LENGTH | INCHES NOMINAL 1.440 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MAXIMUM 1.840 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.940 |
| AFLW | ACTUATION METHOD | DIRECT |
| AJFY | SEAT ANGLE IN DEG | 45.0 |
| AMDX | FIRST END HOLE DIAMETER | ALL WORKING ENDS INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| AMPC | FIRST END THICKNESS AT MOUNTING HOLES | ALL WORKING ENDS INCHES MINIMUM 0.432 AND INCHES MAXIMUM 0.437 |
| AMQZ | COMPRESSED LENGTH | INCHES NOMINAL 11.500 |
| ATEM | EXTENDED LENGTH | INCHES NOMINAL 13.000 |
| BHMS | MOUNTING PROVISION FOR WHICH DESIGNED | PIN(S) |
| BMWH | RESERVOIR TYPE | REMOTE |
| BYXG | STRAIGHT BORE INSIDE DIAMETER | INCHES MINIMUM 1.188 AND INCHES MAXIMUM 1.520 |
| CKSF | FIRST PISTON ROD END STYLE | |
| CLMQ | MOUNTING FACILITY DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| CLMT | PORT STYLE | |
| CLMW | PORT THREAD SERIES DESIGNATOR | SINGLE PORT UNF |
| CLMX | PORT THREAD DIAMETER | SINGLE PORT INCHES NOMINAL 0.438 |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 |
| CLNB | PORT THREAD CLASS | 3B |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
| MATT | MATERIAL | BODY ALUMINUM ALLOY 356.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 77272-114HS105 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114HS105 FSCM 77272 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 114HS105-6 | 77272 |
| 114HS105-6 | 81205 |
| 18050-10 | 99643 |
Supersedes
This item replaces cancelled NIINs 007168616 · 009916994. An older drawing citing one of those numbers resolves here.