NSN 5990-01-087-6466 · NIIN 010876466 · FSC 5990
NO DASHES 5990010876466
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 0.9800 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.0550 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3600 AND INCHES MAXIMUM 0.3900 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 125.0 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 0.5 AND MAXIMUM 57.5 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 1600.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 33.8 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 405.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 112.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 30.50 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | NOMINAL 0.5 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 80.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.120 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1852.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 460.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 4.50 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.488 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 8 |