NSN 3020-00-542-1252 · NIIN 005421252 · FSC 3020
NO DASHES 3020005421252
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.6657 AND INCHES MAXIMUM 1.6667 |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.5000 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 75.0 AND ROCKWELL C MAXIMUM 83.0 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.2500 |
| AAQL | BODY STYLE | |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 75.0 AND ROCKWELL C MAXIMUM 83.0 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| MATT | MATERIAL | OVERALL STEEL COMP 303S AND STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC ALL MATERIAL RESPONSES -IL-S-7720 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.707 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.2498 |