NSN 5305-00-940-9487 · NIIN 009409487 · FSC 5305
NO DASHES 5305009409487
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.188 |
| AASK | HEAD STYLE | |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 2A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.226 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.096 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.188 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| CYAU | SCREW MATERIAL | STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| ASXK | HOLE QUANTITY | 1 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
Supersedes
This item replaces cancelled NIINs 002269656 · 006164827 · 008033127 · 008657107. An older drawing citing one of those numbers resolves here.