NSN 1650-00-085-1107 · NIIN 000851107 · FSC 1650
NO DASHES 1650000851107
In Stock
MOTOR,HYDRAULIC
Aircraft Hydraulic, Vacuum, and De-icing System Components
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.354 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 0.427 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.490 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 15 |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 0.671 |
| ASAP | SPLINE PITCH | 32/64 |
| ASMM | CONNECTION QUANTITY | 1 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 0.562 |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | AND 10050-16 |
| AZFG | MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. |
| MATT | MATERIAL | HOUSING STEEL |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 1.312-12 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.469 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UN |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. |
| ZZZV | FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM |