NSN 1650-00-143-8315 · NIIN 001438315 · FSC 1650
NO DASHES 1650001438315
In Stock
SERVOCYLINDER
Aircraft Hydraulic, Vacuum, and De-icing System Components
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CLMX | PORT THREAD DIAMETER | INCHES NOMINAL 0.437 |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 |
| CLNB | PORT THREAD CLASS | 3B |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CLMT | PORT STYLE | |
| CLMJ | FIRST END FORK SPAN WIDTH | INCHES NOMINAL 0.751 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PART NO. 204-076-053-11,FSMC 97499 |
| ABXV | BORE DIAMETER | FOURTH INCHES NOMINAL 0.938 |
| ABXV | BORE DIAMETER | SECOND INCHES NOMINAL 0.801 |
| ABXV | BORE DIAMETER | SEVENTH INCHES NOMINAL 1.066 |
| ABXV | BORE DIAMETER | SIXTH INCHES NOMINAL 1.000 |
| ABXV | BORE DIAMETER | THIRD INCHES NOMINAL 0.885 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 1.390 AND INCHES MAXIMUM 1.410 |
| AJFY | SEAT ANGLE IN DEG | 120.0 |
| AMDX | FIRST END HOLE DIAMETER | INCHES NOMINAL 0.3437 |
| BHMS | MOUNTING PROVISION FOR WHICH DESIGNED | PIN(S) |
| AAHR | SECOND END OUTSIDE DIAMETER | INCHES NOMINAL 0.593 |
| AAXX | MOUNTING TYPE | CENTER SECTION TRUNNION |
| ABJH | TEMP RATING | CELSIUS -65.0 AND CELSIUS 180.0 |
| ABKP | MOUNTING FACILITY LENGTH | INCHES NOMINAL 0.500 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 2.980 AND INCHES MAXIMUM 3.030 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 2.600 |
| ABMZ | DIAMETER | MOUNTING FACILITY INCHES MINIMUM 0.4986 AND INCHES MAXIMUM 0.4991 |
| ABXV | BORE DIAMETER | FIFTH INCHES NOMINAL 0.957 |
| CKRM | INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CKSF | FIRST PISTON ROD END STYLE | |
| CLMB | FIRST END LARGEST INSIDE DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| CLMD | FIRST END FORK WIDTH | INCHES NOMINAL 0.700 |
| CLMG | FIRST END FORK DEPTH | INCHES NOMINAL 1.600 |
| ABXV | BORE DIAMETER | FIRST INCHES NOMINAL 0.625 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY FED SPEC SINGLE MATERIAL RESPONSE QQ-A-268, CO- 2024, T4-CANCELED |
| MATT | MATERIAL | BODY ALUMINUM ALLOY 2024 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SGT220-11 | 92003 |
| 204-076-053-11 | 97499 |