NSN 1650-00-554-8102 · NIIN 005548102 · FSC 1650
NO DASHES 1650005548102
In Stock
MOTOR,HYDRAULIC
Aircraft Hydraulic, Vacuum, and De-icing System Components
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSA | SPLINE QUANTITY | 11 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 23.5 |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| SFTT | SURFACE TREATMENT | HOUSING ANODIZE |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 0.417 |
| ZZZV | FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM KC135 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 0.625 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.458 |
| AXFM | DRIVE SHAFT GOVERNMENT STANDARD | AND10263 |
| AXFN | MOUNTING GOVERNMENT STANDARD | AND10260 |
| AWLS | CONNECTION TYPE | SECOND END INLET |
| AWLS | CONNECTION TYPE | THIRD END OUTLET |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT NO SPECIFIED TEMP RANGE |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.533 |
| AAXX | MOUNTING TYPE | FLANGE |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 0.049 |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | AND10050-3,AND10050-6 AND AND10050-6 |
| AZFG | MOUNTING BOLT HOLE SPACING | 1.875 IN. BY 1.875 IN. C TO C |
| ASAP | SPLINE PITCH | 24/48 |
| ASMM | CONNECTION QUANTITY | 3 |
| AWLS | CONNECTION TYPE | FIRST END DRAIN |
| ABSF | KEY WIDTH | INCHES NOMINAL 0.281 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.281 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.375-24 AND 0.563-18 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 0.500 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| MATT | MATERIAL | HOUSING ALUMINUM ALLOY |
| FEAT | SPECIAL FEATURES | W/INTEGRAL SPEED CONTROL |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 601003 | 62983 |
| 600717 | 62983 |
| 600702 | 62983 |
| ML11D06-15DS225-4 | 62983 |
Supersedes
This item replaces cancelled NIIN 003874310. An older drawing citing one of those numbers resolves here.