NSN 3040-01-399-0281 · NIIN 013990281 · FSC 3040
NO DASHES 3040013990281
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | SECOND END FIFTH PORTION INCHES NOMINAL 1.1680 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 8.7400 |
| ABND | TAPER LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 0.9650 |
| ABND | TAPER LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 0.9650 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END FIFTH PORTION UNIFIED NATIONAL COARSE (UNC) |
| AKAF | SHAFT THREAD DIRECTION | SECOND END FIFTH PORTION RIGHT-HAND |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.4375 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 14.500 |
| CFFG | WORM HELIX ANGLE | 5 DEG 3 MIN |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 1.7790 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 1.5000 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 1.5000 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END THIRD PORTION INCHES NOMINAL 0.7340 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FOURTH PORTION INCHES NOMINAL 0.2200 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SECOND PORTION INCHES NOMINAL 1.7490 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SECOND PORTION INCHES NOMINAL 1.4370 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END THIRD PORTION INCHES NOMINAL 1.1240 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FOURTH PORTION INCHES NOMINAL 0.7300 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES NOMINAL 1.2480 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SECOND PORTION INCHES NOMINAL 1.2480 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | SECOND END THIRD PORTION INCHES NOMINAL 0.2510 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | SECOND END THIRD PORTION INCHES NOMINAL 0.0730 |
| CFGD | TAPER LARGEST DIAMETER | FIRST END FIRST PORTION INCHES NOMINAL 1.8900 |
| CFGD | TAPER LARGEST DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 1.8900 |
| MATT | MATERIAL | STEEL CORROSION RESISTING |