NSN 1680-01-487-1503 · NIIN 014871503 · FSC 1680
NO DASHES 1680014871503
In Stock
RELAY DIODE ASSEMBL
Miscellaneous Aircraft Accessories and Components
Application: LAU-115
Technical characteristics
5 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | LAU-115 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | RELAY/DIODE ASSEMBLY - LAUNCHER, LAU-115 |
| FEAT | SPECIAL FEATURES | COVER DIODES, TERMINAL BOARD, FULL WAVE RECTIFIER AND RELAY TERMINALS WITH SILICON RUBBER, FN 36, AFTER ASSEMBLY; ELECTRICAL BOND PER MIL-STD-464 SUCH THAT METAL TO METAL DC RESISTANCE SHALL BE 0.1 OHMS MAXIMUM RESISTANCE; TEST SHALL BE PERFORMED BETWEEN SCREW, FN 30 AND ELECTRICAL BOND AREA |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SUPP | SUPPLEMENTARY FEATURES | SEE CIRCUIT CONFIGURATION DRAWING, 3929AS937, FOR WIRE ROUTING INFORMATION; ROUTE WIRES APPROXIMATELY AS SHOWN IN FIGURE 1, SHEET 2; USE LACING TAPE, FN 34 TO SECURE WIRE BUNDLES AS REQUIRED; APPLY CORROSION PREVENTATIVE COMPOUND, FN 37, TO EXPOSED ELECTRICAL CONNECTIONS; SOLDER CONNECTIONS SHALL BE I/A/W IPC/EIA-J-STD-001, CLASS 3, USING SOLDER, FN 38; ALTERNATE SOLDERS MAY BE USED PROVIDED THAT THEY MEET THE REQUIREMENTS IPC/EIA-J-STD-006; PREFERRED ALTERNATES: SN60AWR0L05, SN63AWR0L04 AND SN63AWR0L05 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3929AS930 | 30003 |
| 74B730082-103 | 76301 |
| 74B730082-103 | 8V613 |
| 3929AS930 | 072E5 |
| 74B730082-103 | 072E5 |