BLADE RETAINING BOLT
Miscellaneous Aircraft Accessories and Components
Application: BOLT HEAD IS FLAT, CIRCULAR AND 0.293 THICK; SURFACE OF HEAD HAS 5 BLIND HOLES: DIA 0.188 X 0.293 DEPTH - 4 OF THE HOLES ARE AROUND THE OUTER EDGE OF THE BOLT HEAD SURFACE MEASURING FROM THE CENTER OF THE 5TH BLIND HOLE LOCATED IN THE CENTER OF THE HEAD TO EACH OF THE 4 SURROUNDING BLIND HOLE CENTERS IS 0.430 EA; AT THREAD END OF BOLT THERE IS A 30.0 COUNTERSUNK BLIND HOLE IN THE END OF THE BOLT TRAVELING TOWARDS THE HEAD END WITH A DIA OF: 0.370 X 0.609 DEPTH; FROM BOTTOM OF HEAD TO END OF THREAD END OF BOLT THE LENGTH IS: 1.050; SHANK DIA OF BOLT IS: 0.554
Technical characteristics
6 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE |
| THDS | THREAD SIZE AND SERIES/TYPE DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) 0.-18 3A |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.343 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.260 |
| AGAV | END ITEM IDENTIFICATION | BOLT HEAD IS FLAT, CIRCULAR AND 0.293 THICK; SURFACE OF HEAD HAS 5 BLIND HOLES: DIA 0.188 X 0.293 DEPTH - 4 OF THE HOLES ARE AROUND THE OUTER EDGE OF THE BOLT HEAD SURFACE MEASURING FROM THE CENTER OF THE 5TH BLIND HOLE LOCATED IN THE CENTER OF THE HEAD TO EACH OF THE 4 SURROUNDING BLIND HOLE CENTERS IS 0.430 EA; AT THREAD END OF BOLT THERE IS A 30.0 COUNTERSUNK BLIND HOLE IN THE END OF THE BOLT TRAVELING TOWARDS THE HEAD END WITH A DIA OF: 0.370 X 0.609 DEPTH; FROM BOTTOM OF HEAD TO END OF THREAD END OF BOLT THE LENGTH IS: 1.050; SHANK DIA OF BOLT IS: 0.554 |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 767038 | 99167 |