NSN 5935-00-280-2070 · NIIN 002802070 · FSC 5935
NO DASHES 5935002802070
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.281 |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.625 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.000 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END ALL CONTACT GROUPINGS BACK |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END ALL CONTACT GROUPINGS GOLD |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AAJD | THREAD CLASS | 2A |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END ALL CONTACT GROUPINGS NONREMOVABLE |
| CSCF | TERMINAL TYPE | SINGLE MATING END ALL CONTACT GROUPINGS SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC5015 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| CQZG | INSERT MATERIAL | SINGLE MATING END RUBBER |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 0.969 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.969 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.562 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.281 |
| CXCG | INCLUDED CONTACT QUANTITY | 7 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END ALL CONTACT GROUPINGS ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PRMT | PRECIOUS MATERIAL | GOLD |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND WEATHERPROOF |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.191 |
| AFQW | MATING END QUANTITY | 1 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.120 |
Supersedes
This item replaces cancelled NIIN 002802071. An older drawing citing one of those numbers resolves here.