NSN 3010-01-127-1731 · NIIN 011271731 · FSC 3010
NO DASHES 3010011271731
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 1.375 |
| AAJU | OVERALL LENGTH | INCHES 3.328 |
| AAJV | OVERALL WIDTH | INCHES 1.375 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1875 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 300.0 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.475 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 0.812 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 0.812 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.135 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 12.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 3.800 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FEAT | SPECIAL FEATURES | EXCEPT AS MODIFIED BYSTYLE,FLANGE IS ROUND |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
Supersedes
This item replaces cancelled NIIN 014118477. An older drawing citing one of those numbers resolves here.