NSN 5905-00-432-7285 · NIIN 004327285 · FSC 5905
NO DASHES 5905004327285
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06200 |
| AAPN | SECTION QUANTITY | 2 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.87500 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.190 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 2.00000 |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 2 AND 2ND SECTION 1 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.07300 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.620 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.698 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.09300 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 356.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.60 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 02989-205A5619 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 9 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 5.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1ST SECTION 167.0 AND 1ST SECTION 189.0 AND 2ND SECTION 178.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.225 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.850 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 105.0 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 2.0 |